Driveway Sealcoating – Seal coating is an emulsion made of components that are resistant to oil, gas, road salt and other chemicals, and UV radiation, according to the Pavecoat website. The emulsion is applied manually by spraying or with a squeegee over the entire asphalt surface. The coating must then heal without being disturbed by vehicle traffic or pedestrian traffic. Where appropriate, the striping is done during the curing period. After 24 hours, the sealing layer is ready for use.
A new driveway looks sleek and smooth. However, in no time the driveway could get rough and damaged unless it is properly protected. One way to protect is to seal it. When a covered driveway sealcoating, chemical sealant layer is placed over every centimeter of the driveway. This provides a buffer between the road and the elements.
A driveway sealcoating covered entrance way maintains its new brand image and appearance much longer, preserving their aesthetic appeal. One reason that both asphalt and concrete driveways and dried crack are absorbing the sun’s ultraviolet rays. Sealing of the road will help block the rays and its effects. If a road is closed, the water will not get into the crevices. This can be very beneficial as a lot of damage is done when the water inside of a driveway freezes and thaws with the seasons.